Blog

Water Heater Repair Santa Ana Blog

Our blog is designed to give homeowners as much information on general plumbing repair tips, not just Santa Ana water heater repair advice.  Many home plumbing maintenance tasks homeowners can be well equipped  to take care of themselves.  Enjoy!

The Great Water Heater Temperature Dispute

Posted by on Jan 26, 2014 in Water Heater Repair Santa Ana | 0 comments

There are different views on exactly what is the very best temperature at which to set ones water heater. Water Heater Repair Santa Ana will be sharing some of the different views with specific evidence from those sources in order for one to make his or her own decision on the subject.Water Heater Repair Santa Ana

First of all, the default setting most water heater makers have their tanks set at is 140 degrees. If you have actually never examined this already, that may be the temperature it is set. Also, it can be challenging to understand for sure exactly what the temperature setting is since numerous times the temperature level dial does not have degrees printed on it, simply warm, hot, really hot … something to that end. Some people feel they are pre-set at a higher temperature so it feels impressive to have a lot of hot water – sort of like trying to create good brand name awareness in consumers.

In terms of energy savings, by turning a water heater down from 140 to 120 degrees, it will conserve between 6 to 10 percent of energy usage. That equates to in between $6 to $20 a year in most cases.

Let’s begin off with the most likely the most popular source, the U.S. Department of Energy. They recommend a setting of 120 degrees. The link to their website above provides lots of excellent details on the best ways to minimize ones hot water consumption and costs. It is for sure worth a read.

Now for the health dangers of too low of a temperature setting. It can be shown that Legionella bacteria has the optimum growth range in between 68 to 122 degrees. Treehugger states that “25 percent of all water heaters have differing levels of Legionella bacteria contamination.”

According to The National Center for Biotechnology Information: “There are two opposing risks when it comes to water temperature inside domestic water heaters; exposure to Legionella, the bacteria responsible for Legionnaires’ disease (pulmonary legionellosis), and the risk of scalding.” (read more…)

Legionella bacteria triggers a kind of pneumonia and is passed to humans when one breathes in water contaminated with the bacteria – generally in showers, whirlpool baths or even air conditioning systems. Drinking the water is normally ok. It is a concern with having the bacteria get in ones lungs.

The Centers for Disease Control and Prevention estimates 8,000 to 18,000 Americans contract the condition annually. Five to 30 percent of the cases are deadly.

According to the Occupational Safety & Health Administration, here are some of the factors that can increase the risk of getting the disease:

  • Organ transplants (kidney, heart, etc.)
  • Age (older persons are more likely to get disease)
  • Heavy smoking
  • Weakened immune system (cancer patients, HIV-infected individuals)
  • Underlying medical problem (respiratory disease, diabetes, cancer, renal dialysis, etc.)
  • Certain drug therapies (corticosteroids)
  • Heavy consumption of alcoholic beverages

Cases to not have the water heater temperature level set at 140 degrees would be if there are small kids in your house or potentially with elderly individuals too. The danger of being burnt if the faucet was totally on hot water can be too great. Undoubtedly, anybody living in the house that is at danger of contracting Legionella Disease ought to have it set at 140.

In Conclusion

So decide if there are any issues of people burning themselves if the water temperature level is too high. Likewise, be conscious of anybody who has concerns of contracting Legionella Disease. Considering that the yearly cost savings of turning the temperature level down is only about $20 most the time with the typical home’s hot water use, it may be a good choice to keep the temperature above 120 degrees just for the health related benefits; nonetheless, Water Heater Repair Santa Ana will let you make the call.

The following 2 videos reveal how to adjust the temperature level on both an electric and a gas water heater in case you are unsure the best ways to do so.

How to Change the Temperature on an Electric Hot Water Heater

How To Change The Temperature On A Gas Water Heater

Read more articles in our blog.

Water Heater Safety Advice Tips

Posted by on Dec 3, 2013 in Water Heater Repair Santa Ana | 0 comments

Correctly maintaining ones water heater is important not so it works to its complete capacity and can conserve some energy cash, however for security issues too. Yes, it can blow up – it does not occur too often for homeowners, however obviously this is something that Water Heater Repair Santa Ana doesn’t want to have occur to you!

Vents
Venting can be type of technical but we will go over the essentials here. The vent ought to be the exact same diameter as the draft diverter of the water heater tank. It is expected to increase and out (for atmospherically vented heaters). Not various other directs like up, down, up and out. For direct-vent water heaters, the vent should go out a side wall. When it comes to power-vent heaters, the fan blows the fumes out, so there is some versatility in the instructions they are vented.

Any roofing system or wall that the vent goes through ought to be a double wall. The single wall pass throughs must be screwed with 3 screws per section. If these basics are not followed, the vents can break down over time and carbon monoxide can cause major problems within ones house. Naturally we don’t want that to happen!

The only other interested in ventilation is that of backdrafting. The fumes can consume the vents with acid condensation. If enough of this gets on cold piping and the water heater it will not be a great scenario for an effectively working water heater. If the fumes return inside the rather of being properly vented outside, the fumes can enter the living locations of the house. Soot troubles can arise also.

Dielectric Connectors
The steel water heater is connected to cooper pipes by the dielectric connectors. When two these 2 metals are assembled in water electrolysis happens. The procedure rusts one metal away to secure the other. This procedure is vital in safeguarding the inside of the water heater. Evaluation for leaks ought to be done where the connections are made.

Temperature and Pressure Relief Valve
This is kinda of a fundamental part of the water heater, for it helps see to it the darn thing does not blow up under pressure if the temperature level goes beyond the proper limits the water heater is developed for. Once a year (a minimum of) the T&P valve must be inspected to see to it, it is working appropriately, for they can be prone to failure. Just lifting up on the handle water must flow easily out and stop when the handle is released. If it simply runs or drips, or does nothing at all, it will have to be replaced.

The drain lines for the T&P line ought to not be directed up, because water does not flow uphill too well. Make sure it goes downhill and or out please. If water is running out the drain line regularly, it is the sign of something incorrect too. It could be among a number of different things that we will not go into here – simply get in touch with a neighborhood plumbing professional please.

Earthquake Straps
Yep, even if you do not reside in an earthquake zone and are required to have these on ones water heater, it is a pretty good idea to do so. It appears like a lot of all new houses in sub-divisions nowadays have the water heater in the garage. Yes, there is generally a concrete curb in front of it so one does not drive an automobile into it, however things can mistakenly knock it over so be safe and strap that say thanks to in.

Temperature Setting
It seems most residential water heater tanks have setups of warm – hot – very hot … and not degree markings. Some “tips” on conserving energy at home particularly in the winter time, say to decrease the setting on the tank to 120 degrees. That’s great for conserving energy but legionella bacteria, which causes Legionnaire’s condition can grow at 120 degrees. By breathing in the mist from the water in the shower, one can inhale the germs. Try to find a medium between 130 and 120 degrees. Above 130 degrees is technically a scalding temperature level so be careful.

Anode Rods
These normally are made of aluminum and there is nothing incorrect with that in theory, though we suggest making use of magnesium ones. Let’s state for whatever reason there is some sort of emergency or disaster where one lives and one needed to use the water in the water heater for drinking water (because bunches of emergency readiness individuals advise doing so). The water that comes out of the drain valve is the water at the bottom of the tank. If one has aluminum anodes, that water will be laden with aluminum compounds, which is bad for the body. It is bad for the stomach, intestines and joints.

The anodes assist with rust security and are essential in prolonging the life of the water heater. They can likewise assist with odor issues with the water. Generally, magnesium anodes simply work better for a great deal of various reasons like the wellness perks, let develop up of sediment, a quieter water heater, and they have the tendency to work better with softened water.

Drain Valve
Ok, just inspect it at least yearly to make sure the darn thing opens and works. And it is pretty good to drain and flush the tank a minimum of once a year anyhow (something you obviously are doing currently). If for some reason one needs to make use of the water during a catastrophe or drain it to quite a noisy tank and have not drained it regularly, and it does not open, it will take longer to fix the issue you are at first trying to repair.

Combustion Changer Hatch
Because gas and oil water heaters breathe the air sucked in from underneath, combust with it and exhale it, it is very important to keep the location around it, specially beneath the water heater, clean and swept. If if is not burning correctly, it can cause drafting concerns (mentioned above), along with combustion and fume problems and potentially be a fire hazard. Some of examining the chamber and how the flame burns is objective so we are not going to go into a great deal of information right here. it is very important to see if the combustion chamber roof has a bunch of rust or water markings or is black in color. These are not a good sign at all. One ought to see some blue flame at the bottom when it burns and orange and yellow at the top, nevertheless, the yellow must not be incredibly high up. One must see gray metal, some white condensation marks are ok.

Water Heater Repair Santa Ana has put together an infographic to highlight the information above:

Water Heater Repair Santa Ana

Enhanced by Zemanta